tractor

People at work: hoophouse goes up!

by

Another beautiful and busy day in the field, with Lynn, Mel, Jordan, Tara and, for her first full day, Andie, all variously raking, tilling and building. And eating lunch (can’t wait for proper farm food to kick in!). The most VISIBLE accomplishment today: we put up the frame of the hoophouse, which is the main part of the job. This was mostly done by Andrea and Jordan, first-time building for both of them, with me holding hoops, furnishing tools, and starting them out with some how-to advice. Working with light, pre-formed metal is particularly satisfying, things can go up fairly quickly, to produce dramatic results (or maybe it’s just me, waiting for that greenhouse!!!). It seemed like the satisfaction at the end was pretty deep! :)

Screwing the hoops to the ridge is the main structural task. We used the bucket on the Kubota compact tractor as a raisable platform…

Since this is a re-assembly job, all the parts and pieces were there to be…assembled. First, lay out the 4×4 base, and pound in eight 3′ (0.9m) iron T-bar stakes to anchor the hoophouse. The T-bar is attached to the wood with lag bolts. Pounding was relatively easy, the ground is still soft, but a little bit of a workout. And if you look closely, near Andie’s foot and Jordan’s knee, you can see the brackets that the hollow steel hoops fit over, at 4′ (1.2m) spacing…

Next up, starting the frame. Attaching the first two pairs of hoops to the ridge is the trickiest part. The hoops slip over stubs in the ridge, then they’re screwed in place. A cordless drill and a couple of wrenches were all the tools we used. It’s wobbly at first, the more hoops you add, more stable it gets!

And there we are! Andie tightens up nuts on the cross-braces (purlins). In front, the lumber for an end wall is layed out. Halfway there. All in a tiny farm day’s work…

Tiny machine action

by

Beautiful weather, around 60°F (15°C) in the full-on sun, with a crisp undercurrent of a breeze… What could be nicer for the first full day of fieldwork?! Lynn, Mel and Jordan came by at 8:30 am, and Tara joined in a little later on. We’re still working on preparing the beds, so the main action was raking and ROTOTILLING…busting up that sod. And everyone’s gearing up for the season, learning where things are and how to do…stuff. Like…rototilling! Mel tries her hand at it for the first time (above)—the Kubota compact tractor is as reliable, steady, and undaunting as ever…

Tara also rototills for the first time. Here, she executes what looks like a nimble little turn…

Mel inspects the results of a pass with the rototiller, checking out the effect of tilling at different speeds. And the tiny farming goes on… (Photos 2 and 3 by Mel)

The great WARM outdoors!

by
First really warm day of the year!

Ahhh, yes, THIS is what warm weather feels like! For the first time this year, the temperature topped 60°F (15°C), with a hazy sun and a gentle breeze. We’ve had some melt-off days already, but this one tastes like spring! Usually, there’s a day like this sometime in February, so it’s been a long time coming, and makes me wonder how even crazier the rest of the weather will be. No worries…today feels great.

The photo is a good to-do list for when real spring comes and the ground is dry enough to work and get around on. There’s a jumble of spare lumber taken from the barn when we cleared an area for the new seedling room—it needs to be sorted and stacked, and some of it will be the new chickenhouse! (Only patches of snow are left on much of the land, but I’m sure it’ll be back before it’s really gone.) The abundantly overgrown grasses that partially surround the barn and border the moldboarded garden areas is a big clean-up job. And, up the slope, the Kubota compact tractor calmly waits for after the hired-big-tractor disking and the compost spreading, when we do the final tilling of the garden beds. Coming soon. Cool!

Loaded

by

The Kubota compact tractor is a real work horse, it can do just about anything you set it to. On a tiny farming scale, of course. It’s had to winter outside this time around, but it’s been starting no problem, on first try, after the recent battery change. Who knew that a fresh, premium battery could make such a difference (well, many know, and now I’m one of them!)? Today’s beast of burden mission: moving a dozen bales of rock wool insulation—a last bit of the new seedling room—from the lower barn, up a slope, to the upper level doors on the other side of the building. Three trips instead of 12. They’re not particularly heavy, just big and bulky, so no problem wedging them on the hood. When loading up like this, it’s important not to mess with the hydraulic lines that run along the arms and across the front of the loader. Besides that, just pile ’em on!

Barn work continues

by

Momentum is slowly building at the new farm. The trusty Kubota compact tractor is on site, there to help out wherever it can. Today, we just about finished the demolition in the barn, which included a small room on the upper level (pounded together with a million 3″ nails), and a stall area in the lower level that looked good maybe for goats. Below, Michael uses a sawzall  (reciprocating saw) to cut things up. The sawzall is my favorite power tool of the moment. With a heavy duty demo blade, it sails through wood and nails no problem (you can see the stall poles sawed just above where they’re set in concrete). Sometimes, you have to tear down in order to build—with the right tools, that can be fun. We’re moving along—the new seedling room is on its way!

Battery change

by

There’s nothing remarkable or even that interesting about changing a battery—routine maintenance on the tiny farm—EXCEPT… Today, I finally got around to replacing the battery, for the first time, on the Kubota compact tractor. It was a quick and simple operation that put instant new life into the trusty little tractor. It also made me realize how fond one can become of a MACHINE. I know this is nothing new: for example, car lovers. For me, though, it’s a first. Like, I love my wheel hoe, but it is such a simple tool, the attachment is more to the idea of it than to the machine itself. The complex workings of the tiny tractor, however, are largely a mystery to me. I can maintain it, and fix an increasing number of things, and I understand the general principles it runs on, but mostly, I simply trust that turning the key will bring it to life. And it hasn’t failed me over the years, faithfully and reliably performing its tiny farming tasks, asking little in return (it’s even good on diesel!). So here I find myself, strangely, with a deep affection for a machine… Cheers! This new $100 Mega-tron II battery is on me! :)

Bringing in the pipe

by

Bit of unusual fieldwork on the menu today, something we don’t do every year. Bob and I brought in about 1,000′ (305m) of 1″ (2.5cm) and 1-1/2″ plastic irrigation pipe, that ran all the way from the pond to the gate into the garden field. Why wasn’t this done in better weather, when, besides having no snow to deal with, warmer plastic would’ve been a lot easier to handle, especially to BEND? There’s no good answer, except maybe, “Didn’t think it’d be this cold and snowy so soon!” Anyhow, it got done, and probably in exactly the same time…

I used the Kubota compact tractor to drag the pipe in three 300′ sections, right into the barnyard (the rope is tied to the front end loader bucket; in the pic, this is at the very end of the garden, where it meets the hay, so all that stubble is mainly long grass). Backing up down the field, I worked it from the far end for the section that lay in the unmown grass right near the fence, so that it could more easily tear its way out of the overgrowth. Then, some coiling (that’s Bob), tying off the loops every few turns with baler twine (plastic twine used to bale hay, it’s all over the place)… Easy!


Home

All of 2025

Stories

7 ways to browse